3&5&7 Corrugated Cardboard Production Line Matching With 320F Single Facer
main technical parameters and requirements in production line
| 1 | Effective width | 1800mm | 2 | Design produce speed | 150m/min |
| 3 | Three layer work speed | 100-140m/min | 4 | Five layer work speed | 90-130m/min |
| 5 | Seven layer work speed | ------------------- | 6 | The highest change single speed | 100m/min |
| 7 | Longitudinal separation accuracy | ±1mm | 8 | Cross-cutting precision | ±1mm |
| note | Speed the above targets required to achieve:effective width1800mm,Comply with the following standards and ensure the paper's equipment condition 175 ℃ heating surface temperature. |
| | Top paper index | 100g/㎡--180g/㎡ Ring crush index(N.m/g)≥8 (Water containing8-10%) |
| | Core paper index | 80g/㎡--160g/㎡ Ring crush index(N.m/g)≥5.5 (Water containing8-10%) |
| | In paper index | 90g/㎡--160g/㎡ Ring crush index(N.m/g)≥6 (Water containing8-10%) |
| 9 | Flute combination | |
| 10 | Steam requirement | The maximum pressure 16kg/cm2 | Common pressure10-12kg/cm2 | use4000kg/Hr |
| 11 | Electricity demand | AC380V 50Hz 3PH | Total power≈220KW | Running Power≈150KW |
| 12 | Compressed air | The maximum pressure 9kg/cm2 | Common pressure4-8kg/cm2 | use1m3/min |
| 13 | space | ≈Lmin70m*Wmin10m*Hmin5m(The actual drawing to provider to provide audited prevail) |
ZJ-V5B hydraulic shaftless mill roll stand
※structural feature:
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time.
※technical parameters:
1,the range of clamping paper:MAX1800mm MIN1000mm
2,clamping diameters:MAX￠1500mm MIN￠
350mm 3,main shaft diameter of paper holder:￠240mm
4,gas source work pressure(Mpa):0.4---0.8Mpa
Mainly purchased parts, raw materials and origin:
| Name of main parts | Brands or place of origin | material |
| Main shaft | Day steel production | diameter242mm |
| Swing arm | Production by own | Resin sand gray ironHT200 |
| wallboard | Jigang prduction | Q235AWelding parts |
| bearing | HRB,ZWZ,LYC | |
| Toothed chuck | Zhejiang xusheng | 3,4inch shared |
| Main electrical appliance | France Schneider | |
| button | CHINT NP2series | |
| Air switch | French Schneider | |
| Pneumatic components | Zhejiang Sonor CSM | |
| Hydraulic station | Shandong zaozhuang | |
| Brake pump | zhejiang | |
Product Tags:
|
|
3&5&7 corrugated Cardboard Production Line Matching With 320F Single Facer Images
|
